The maintenance of the bubble fruit and vegetable cleaning machine is an important device for removing sand, impurities and pesticide residues from the surface of fruits and vegetables. It mainly adopts the combination of high-pressure bubble spray and clean water rinse to achieve the purpose of cleaning fruits and vegetables. To ensure the long-term stable and efficient operation of the equipment, scientific maintenance and care operations are of vital importance. The following will introduce to you some easy-to-operate maintenance methods and usage tips.

The Key To Ensuring Stability Is As Follows:
Objective: After daily use, thorough cleaning should be carried out to ensure the hygiene and safety of production and to prevent residue in the complementary food equipment.
Method:
1. External cleaning: Wipe the outer shell of the machine with a soft damp cloth to remove water stains. If there are stubborn stains that are difficult to remove, you can scrub them with a neutral cleaner.
2. Cleaning the tank: First, thoroughly remove any remaining fruits, vegetables, sand, etc. in the tank. Then, add an appropriate amount of clean water, start the machine and let it idle for 3 minutes. Use the water flow to rinse the dead corners in the tank clean. After that, drain all the water, turn on the movable water pipe, and rinse again with clean water to ensure there are no impurities, residues or sand.
3. Clean the spray device: First, check if the nozzles are clogged. If they are clogged, use a fine needle or a high-pressure water gun to clear the spray holes and remove impurities to ensure uniform spraying.
4. Filter screen cleaning: After use, remove the filter screen and clean the surface impurities and stains. If the filter screen is damaged, please replace it in time.

Bubble Fruit And Vegetable Washing Machine
Regular maintenance
Objective: To eliminate potential faults and ensure the long-term stable operation of the equipment
Method:
1. Check the air pump: Every week, inspect the air pump for any abnormal sounds during operation. If abnormal noise or excessive noise occurs, turn off the power, use compressed air to blow away the internal dust, and add food-grade lubricating oil to the bearings.
2. Check the air pipe: Every month, inspect whether the air pipe between the air pump and the cleaning tank is blocked or leaking. If it is blocked, clean it in time; if it leaks, replace it promptly.
3. Inspect the filter: Check the sealing and sediment of the filter every month to ensure it is sealed and clean, thereby guaranteeing the effectiveness of the filter.
4. Check the belt or chain: Check the tightness of the transmission components every month. It is advisable to have a distance difference of 2cm after pressing. If it is too tight or too loose, adjust it in time. If the belt has cracks or the chain is stuck, please replace it in time. Please add food-grade lubricating oil in time after inspection.
5. Check the motor: Every month, check if the motor’s operating stability is below 60℃. If the temperature is too high, please stop the machine in time for inspection and troubleshooting. To maintain good heat dissipation, please clean the surface of the motor after inspection.

Seasonal maintenance
Objective: To reduce the impact of changes in environmental conditions.
Method:
1. Summer maintenance: In summer, the air is humid and the temperature is high, which makes it easy for bacteria and mold to breed. Therefore, the frequency of cleaning should be increased, and disinfection should be carried out after daily cleaning. When necessary, fans can be added to ensure good heat dissipation for the motor, air pump, etc.
2. Winter maintenance: In winter, the temperature is low and even freezing may occur. Therefore, after each use, all the accumulated water in the equipment must be thoroughly drained to prevent cracking due to freezing.

By following the maintenance methods explained above, 50% of faults can be prevented, fully ensuring the good cleaning effect of the fruit and vegetable cleaning machine and extending the service life of the equipment. If you encounter any difficult problems in daily use, you can contact us in time to seek professional help.